V7 Dry-type Sand Making Equipment

V7 dry-type sand making equipment developed by NFLG makes breakthroughs in the vertical-shaft crushing, air screening and other key technologies and uses the five-hole impact rotor structure, the state-of-art technology to crush, shape and grind raw materials entering crushers through rotors using the "rock breaking" centrifugal crushing method. This achieves self-generated crushing and high-strength self-generated crushing, thereby efficiently improving the particle shapes of finished sand and increasing the output of fine aggregate. The equipment uses the air screening technology to achieve perfect classification on transfinite particle size, finished sand and sand powder, thereby maximizing the screening efficiency, and uses intelligent control to make the fineness modulus of finished sand adjustable. In addition, the equipment uses the dust collector technology with offline ash removal pulse to efficiently control the content of rock flour in finished sand and operate the whole system in a closed negative pressure environment, thereby realizing the value ideas of green and intelligent sand making for environmental protection.


  • 01 US7 Vertical-shaft Impact Crusher:
    Five-hole impact rotor structure
    The unique material throwing hammer and T-shaped lining paper structure significantly increases the output of particle sizes ranging between 0.15mm and 0.6mm.
    The particle shape improves significantly, with the void ratio less than 42%.
    The service life of a five-hole impact rotor is five times that of a normal rotor.
  • 02 AS Air Screen:
    Vibration transmission and dispersion technologies
    The vibration transmission and dispersion technologies are used together.
    The intelligent air regulation for air blowers can control wind force during screening and clean the surfaces for sand making.
    The new polyurethane mesh can prevent blockage and improve the screening efficiency.
    The fineness modulus is adjustable with the stability reaching ±0.1.
  • 03 Sand Powder Separation Technology:
    The air separation technology with inertial classification requires no energy consumption.
    The adjustable guide plate design maximizes the air flow path.
    Corse particles (with a size bigger than 40μm) in the recovered sand powder improve the quality of finished sand, thereby ensuring a reasonable granular composition of finished sand.
    The technology can reduce power consumption during dust collection and improve dust collection efficiency.
  • 04 Dust Collector:
    The high-efficiency bag dust collector provides the offline ash removal dust collection function to achieve a dust collection efficiency of 99%.
    Polyester peritoneal filter bags provide excellent filtering performance, with the carbon concentration less than or equal to 20 mg/m³ (under rated conditions).
    Automatic differential pressure signal feedback brings high-performance automatic pulse control.
  • 05 Electronic Control System:
    The unique algorithm and control mode are used.
    The granular composition and fineness modulus of finished sand are adjustable, and the sand powder content is controllable.
    Intelligent management for quick-wear parts is used.

main machineUS7-474HUS7-636HUS7-636H/SKY
feeding size(mm)0-130-13
max processing capacity(t/h)60100150
total power(kW)430780870